Table of Contents
Advertisement
Prestige 623ME-T User's Guide
The following figure shows how you apply NAT to the remote node in menu 11.1.
IP Options:
IP Address Assignment = Dynamic
Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= N/A
NAT= SUA Only
Metric= 2
Private= No
RIP Direction= None
Multicast= None
IP Policies=
Figure 17-2 Menu 11.3 Applying NAT to the Remote Node
Step 1.
Enter 11 from the main menu.
Step 2.
When menu 11 appears, as shown in the following figure, type the number of the remote node
that you want to configure.
Step 3.
Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes and then press
[ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.
Select None to disable NAT or SUA Only to enable the Address Mapping Set of
17-2
Menu 11.3 - Remote Node Network Layer Options
Address Mapping Set= N/A
Version= RIP-1
Enter here to CONFIRM or ESC to CANCEL:
Bridge Options:
Ethernet Addr Timeout(min)= N/A
menu 15.2.
NAT
Advertisement
Table of Contents
