ZyXEL Communications Prestige 623ME-T User Manual page 53

LABEL
Client IP Pool Starting
Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS Server As above.
Remote DHCP Server
TCP/IP
IP Address
IP Subnet Mask
RIP Direction
RIP Version
Multicast
Apply
Cancel
LAN Setup
Table 4-1 LAN
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size or count of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
If Relay is selected in the DHCP field above then enter the IP address of the
actual remote DHCP server here.
Enter the IP address of your Prestige in dotted decimal notation, for example,
192.168.1.1 (factory default).
Type the subnet mask assigned to you by your ISP (if given).
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to
establish membership in a multicast group. The Prestige supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
Click Apply to save your changes back to the Prestige.
Click Cancel to reload the previous configuration for this screen.
Prestige 623ME-T User's Guide
DESCRIPTION
4-5