Change Language; Audit; Scroll Events On The Lcd; Download The Audit On A Dallas Key - Tecnosicurezza MiniTech User Instructions

Change language

Power up the keypad. Press and hold
message:
Press one of the available numbers to change the language and press
to confirm or press

Audit

Keypads and lock events can be check on the display or can be stored on a Dallas key (up to
1.200 events) previously programmed through the "MiniTech-DigiTech Audit" software, which will
be used also to read the events stored in the same Dallas key.
The audit can be also downloaded directly on a PC (up to 5.500 events), through an USB
interface provided by Tecnosicurezza.

Scroll events on the LCD

Use this function to check all the opening and closing events stored on the lock.
Power up the keypad. Press and hold
message:
Enter Manager code. LCD will display the message:
Press or wait. LCD will display the message:
LCD will start showing all the opening and closing events stored on
the lock.
Press to scroll all the events or

Download the audit on a Dallas key

Power up the keypad. Press and hold
message:
Enter Manager code. LCD will display the message:
Enter the audit Dallas key into the reader. If the operation is
successfully performed LCD will display the message:
IU_MiniTech_03
. LCD will display the
to exit.
. LCD will display the
to exit.
. LCD will display the
ITALIANO
1 2 3
ENGLISH
1 2 3
LOCK AUDIT
0 1 – X X X X X X
ENTER DALLAS
...
PC LINK
SCROLL EVENTS
001: ! WED
28/09 14:42:48
LOCK AUDIT
0 1 – X X X X X X
ENTER DALLAS
...
OPERATION DONE
Page 9 of 20