Scroll Events On The Lcd; Change Master Code; Manager Management - Tecnosicurezza MiniTech User Instructions

Access the Master menu and access the function. LCD will display the
message:
Enter the audit Dallas key into the reader. If the operation is
successfully performed LCD will display the message:

Scroll events on the LCD

Use this function to check all the opening and closing events stored in the lock.
Access the Master menu and access the function. LCD will display the
message:
Press or wait. LCD will display the message:
LCD will start showing all the opening and closing events stored on
the lock.
Press to scroll all the events or

Change Master code

Access the Master menu and access the function. LCD will display the
message:
Press and enter the new code.
Confirm the new code.
Always perform this operation with the door open.

Manager Management

Access the Master menu and access the function. LCD will display the
message:
Press . LCD will display the message:
"V": Manager installed, "_": Manager deleted, "X": Manager disabled.
Press . If the Manager is not installed LCD will display the
message:
IU_MiniTech_03
to exit.
ENTER DALLAS
...
OPERATION DONE
ENTER DALLAS
...
SCROLL EVENTS
ON LCD
001: ! WED
28/09 14:42:48
CHANGE MASTER
CODE
ENTER NEW CODE
X X X X X X X X
CONFIRM CODE
X X X X X X X X
MANAGER MANAGEMENT
MANAGER v
01
INSTALL?
Page 15 of 20