Information About Minitech - Tecnosicurezza MiniTech User Instructions

Information about MiniTech

Using your keypad
Press any button to power up the keypad.
Automatic power savings: if no operation is performed for 30 seconds the keypad will
automatically switch off.
To scroll menu functions press
To exit from a menu and get back to start menu scroll the functions until the message
"EXIT?" and press
Shortcuts
Press and hold the button corresponding to the needed function.
= Change Manager code (01), users (02-49) and override users (50-59)
= Users management
= Lock setup
= Dynamic codes
= Block/unblock the lock
= Test mode
= Change keypad language
= Audit
= Firmware release
= Time delay
= Back to start menu
= Master menu
Users properties and default codes
Master: code (default: 1-2-3-4-5-6-7-8).
Manager: code (default: ID: 0-1 code: 1-2-3-4-5-6) or code + Dallas key.
IU_MiniTech_03
.
.
Page 3 of 20