Tecnosicurezza MiniTech User Instructions page 4

Users 02 - 49: code (default: ID: 0-2 code: 0-2-0-2-0-2, ID 0-3 code: 0-3-0-3-0-3,
etc...), code + Dallas key.
Override user 50 - 59: code (default: ID 50 code: 5-0-5-0-5-0), code + Dallas key.
Change default codes before operating the lock
Penalty
Four consecutive wrong codes initiate a four minutes penalty. During this period LCD
will display the message "PENALTY" and no operation will be allowed.
Time Delay
Time delay 0-99 minutes; open window 1-19 minutes.
Dallas keys
Available as option for Manager and users (not available for Master).
Power supply
Lock can be powered with an ALKALINE 9V battery, with an internal large battery box
(6 ALKALINE 1.5V batteries) or with power supply and dedicated interface.
Low battery warning
A long beep and the message "BATTERY LOW" indicate the battery is low and has to
be immediately changed.
Audit
The lock stores the last 5.500 operations with time, date, user and operation. The
keypad stores the last 250 operations with time, date, user and operation.
Recommendations
• It is strongly recommended to immediately change the factory codes
• For security reasons, do not chose codes which could be easy to guess (e.g. 1
2 3 4 5 6)
• For your new code, do not use any personal data like birthdays or any other
data, that could be derived by knowledge of your person.
• After code changing, the lock must be tested several times with door in open
state.
• Do not open the lock case, otherwise you compromise the function of the lock
and warranty will be void.
• In order to prevent any possibility that the code become public or known by
unauthorized persons we strongly recommend to store any data and/or code
in a safety place, where only its rightful owner can access.
Never remove lock cover, this voids the warranty.
Page 4 of 20 IU_MiniTech_03