Important Information; Safety Precautions; Sample Assembly Procedure; Suggested Tools - FarmTek PolyMax Manual

READ THIS DOCUMENT BEFORE YOU BEGIN TO ASSEMBLE YOUR DUTCH BUCKET RECOVERY DRIP SYSTEM.
Designing a Dutch bucket system is easy and can be accomplished with minimal guidance. Once you have determined what you want to grow, where you will
assemble the system, and how large of a system you will need, simply compile a list of parts. This guide provides a general overview of a basic Dutch bucket
system. Use it to design your own system. Helpful hints and important information needed to safely assemble and properly maintain the system are also
provided. The components of your system may differ from those shown in this guide.

SAFETY PRECAUTIONS

• Apply PVC cement (if used) in a well-ventilated
area. Follow all instructions on the PVC container.
• Use a portable GFCI (Ground Fault Circuit
Interrupter) when working with electric power tools
and cords. Use battery-powered tools if possible.
• Exercise caution when using all tools.
• Wear eye protection when drilling and cutting.
ABOUT THIS GUIDE
Many different Dutch bucket systems exist; this guide
describes the assembly of one and shows a few other
applications. Consult your sales representative for
important details before you purchase the components
to equip your Dutch bucket system.

SAMPLE ASSEMBLY PROCEDURE

The steps outlining the sample table system assembly
process are as follows:
1. Verify that all parts are included in the shipment.
Notify customer service for questions or concerns.
2. Read these instructions and all additional
documentation included with the shipment before
you begin.
3. Gather the tools and assistants needed to
assemble the product.
2

Important Information

SUGGESTED TOOLS

The following list identifies the tools needed to
assemble a basic table Dutch bucket system
described within this guide. Additional tools and
supports may be needed depending on the specifics
of your system.
• Tape measure and gloves
• Marker to mark locations on PVC tubing
• Variable speed drill (cordless with extra batteries
works best)
• Assorted drill bits and
hole saw bits
• Level
• Tools to cut PVC tubing
and water supply tubing
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin assembly.
1. Unpack the contents of the shipment and place
where you can easily inventory the parts. Refer
to the Bill of Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of Materials/
Spec Sheets are present. If anything is missing
or you have questions, contact Customer
Service.
CARE AND MAINTENANCE
Proper care and maintenance of your system
is important. Check the following items
periodically to properly maintain your Dutch
bucket recovery drip system.
• Check connections and all fasteners to
verify that they remain tight.
• Verify that the pump is working properly.
• Check and clean all filters to optimize
performance.
• Clean the tank (if used) periodically
to prevent unwanted contamination of
solution.
• Monitor temperatures (room and solution)
to maximize plant growth.
• For replacement or missing parts, or to
expand your system, contact your sales
representative.
QUICK START GUIDE
For an overview of a basic Dutch bucket
system, consult the Quick Start Guide near
the back of this guide.
Revision date: 05.01.19