Optional Accessories - FarmTek PolyMax Manual

15

OPTIONAL ACCESSORIES*

Depending on the plant and
application, using 110010 Tomato
RollerHook Assemblies and the
®
110006 or 110007 clips can save time
and labor.
The RollerHook components are
®
easily assembled by slipping the spool
between the wire ends of the hanger.
Position the spool so the lock is next
to the lowest part of the wire spring.
See the photos below.
After assembling each, consult the
following page to view installation
photos using the 110010 assemblies
and the 110006/110007 clips.
*Additional purchase required: Contact
your sales representative to purchase
Tomato RollerHook Assemblies for
®
your Dutch bucket recovery system.
1
18
Assembly Instructions
3
2
Correct
ATTENTION: Photo to the right
shows the spool incorrectly
installed in the wire hanger.
When installed this way, the
spool lock slides under the
lock spring of the handle. As
a result, the cord will unravel
from the spool. The installation
steps below show the correct
orientation.
4
Incorrect Spool
Lock
5
Revision date: 05.01.19