Installing The 110010 Tomato Rollerhook - FarmTek PolyMax Manual

Assembly Instructions
16
INSTALLING THE 110010 TOMATO
ROLLERHOOK ASSEMBLY
®
As plants mature, it may become
necessary to provide adequate support.
The 110010 Tomato RollerHook
®
Assembly used with the 110006 or
110007 tomato clips provide the perfect
support system, saving you time and
money.
Hang the assembled RollerHook® from
a wire, cable, or frame member above
the Dutch bucket system.
Pull cord from the spool so it reaches
the desired Dutch bucket.
Take one 110006 or 110007 clip, wrap
it around the stem of the plant, feed
the cord into the hinged part of the clip,
and snap the clip closed to lock cord in
place.
Move back to the cord spool and
tighten to remove slack. To prevent
plant damage, do not overtighten.
As the plant grows, add additional clips
as needed for support.
1 2 3 4
Revision date: 05.01.19 19