Midi Implementation - Zoom Sampletrak ST-224 Operation Manual

Zoom sampletrak operation manual st-224

Hide thumbs

Table Of Contents

Table of Contents

1. TRANSMITTED DATA

NONE.

2.RECOGNIZED

DATA

1) CHANNEL VOICE MESSAGES

STATUS

SECOND

1000 nnnn

0kkk kkkk

1001 nnnn

0kkk kkkk

1001 nnnn

0kkk kkkk

1010 nnnn

0kkk kkkk

1011 nnnn

0ccc cccc

1100 nnnn

0ppp pppp

NOTE : nnnn = MIDI Channel Number ( 0000 - 1111 )

1 :

Recognized Note numbers are 35-59 at Basic channel on normal mode,

or 95-119 at channel 10 at extention mode.

2 :

Note #12(bank1/pad1)-#35(bank3/pad8) control to change "REVERSE of pad_function(PAD)".

Note #36(bank1/pad1)-#59(bank3/pad8) control to change "EFFECT PAD ENABLE(PAD)".

Note #108(source pad) control to change "EFFECT PAD ENABLE(SOURCE)".

Pressure value(0) is turning off,pressure value(not 0) is turning on.

Note #60(bank1/pad1)-#83(bank3/pad8) control to change "LEVEL of pad_function(PAD)".

Note #84(bank1-pad1)-#107(bank3/pad8) control to change "PANNING of pad_function(PAD)".

Note #109(source pad) control to change "LEVEL of pad_function(SOURCE)".

Pressure value(0 to 99) is value of the control.

If pressure value is greater than 99, internal pressure value is limited to 99.

Note #110(source pad) control to change "PANNING of pad_function(SOURCE)".

Pressure value(0 to 100) is value of the control.

If pressure value is greater than 100, internal pressure value is limited to 100.

3 :

Control #12 can be used to Effect Parameter 1(control value 0..100).

Control #13 can be used to Effect Parameter 2(control value 0..100).

If control value is greater than 100, internal control value is Limited to 100.

Control #14 can be used to Effect BPM 40bpm(control value 0)..167bpm(control value 127).

Control #15 can be used to Effect BPM 168bpm(control value 0)..250bpm(control valeu 82).

Control #80 can be used to EFFECT OFF(control value 0)/ON(control value 127).

Control #81 can be used to EFFECT SYNC OFF(control value 0) / ON(control value 127).