Zoom Sampletrak ST-224 Operation Manual page 58

• To terminate resampling when one-shot playback of pad is
completed
Press the [PAD FUNCTION] key so that the [PAD FUNCTION] LED
lights up.
• To terminate resampling when playback of song is completed
Press the [SONG FUNCTION] key so that the [SONG FUNCTION]
LED lights up.
7
STEP
Press the [RECORD] key again.
The indication "rEAdy" appears on the display.
To resample a song, press the [SONG PLAY/STOP] key. To resample pad play, hit one of
8
STEP
pads 1 - 8.
Resampling starts as soon as the [SONG PLAY/STOP] key or one of
pads 1 - 8 is pressed.
Resampling can be carried out while combining song playback and
HINT HINT
pad play, and while varying effect parameters in real time.
9
STEP To manually terminate resampling, press the [PLAY/STOP] key.
10
STEP If desired, use the [PLAY/STOP] key to check the sample.
11
STEP
Press the [PAD ASSIGN] key twice.
Use the [BANK 1] - [BANK 3] keys and the pads 1 - 8 to select the pad to which you want
12
STEP
to assign the sample.
13
STEP
Press the [PAD ASSIGN] key again.
The new sample is assigned to the selected pad. (Detail of Assigning
a Sample to a Pad
58
BPM/VALUE
MEASURE
p. 27)
BEAT SAMPLE/SONG
SONG
REC PLAY/STOP
PAD ASSIGN
BANK 1– 3 keys
1
BANK
PAD ASSIGN
RECORD
Pads 1 – 8
PLAY/STOP
Pads 1 – 8