Loading Individual Pad Data/Waveform Data (Data Card/Backup Memory) - Zoom Sampletrak ST-224 Operation Manual

Loading Individual Pad Data/Waveform Data (Data Card/Backup Memory)

The ST-224 can individually extract pad data (waveform data and parameter setting information for a
specific pad) from bulk data stored on a data card.
It is also possible to load regular waveform files (WAV or AIFF files) stored on a data card. This lets you
use WAV files or AIFF files created on a computer as samples in the ST-224.
CHORUS EXTREME EQ
PHASER RESONANCE
PITCH SHIFTER LOW-PASS
DIMENSION HIGH-PASS
DISTORTION
RING MODULATOR
EDIT 2
EFFECT
A
B
ON/OFF
PAD ENABLE
EFFECT SYNC
EDIT 1
1
STEP
Hold down the [SPECIAL] key and press the [LOAD] key.
• If the indication "noCArd" appears, the data card is not
NOTE
recognized. Check whether the card has been inserted properly.
• If the indication "Cd Err" appears, there is a problem with the
data card. Format the card again.
2
STEP
Use the [INTERNAL/DATA CARD] key to select the type of file to be used as a source.
With each push of the [INTERNAL/DATA CARD] key, the selection
cycles through the following three settings.
• int
ST-224 bulk data stored internally in the backup memory. Pad data
comprised in the bulk data can be loaded into main memory and
assigned as samples to pads.
• CardXX (XX = 1 - 99)
ST-224 bulk data stored on a data card. Pad data comprised in the
bulk data can be loaded into main memory and assigned as
samples to pads.
• FileXX (XX = 1 - 99)
Stereo or mono WAV files stored on a data card. Waveform data
comprised in files can be loaded into main memory and assigned
as samples to pads.
• AIFFXX (XX = 1 - 99)
Stereo or mono AIFF files stored on a data card. Waveform data
comprised in files can be loaded into main memory and assigned
as samples to pads.
• When storing WAV files or AIFF files on a data card for use with
NOTE
the ST-224, the files should be named "??.WAV" or "??.AIF" (??
stands for a number from 01 - 99). Files with other names are
disregarded.
64
PLAYLIST
MEASURE BEAT SAMPLE/SONG
–
COPY DELETE
TAP
BPM
BACKUP
EXIT
LOAD SAVE INTERNAL/DATA CARD
AUTO SYNC SPECIAL
4 OFFSET
SHIFT
LOOP/MARK
RECORD AUDITION
+
PAD ASSIGN CAPACITY ERASE OPTIMIZE
FUNCTION
PAD
SONG
1
BANK
2
BANK
3
BANK
SPECIAL
BACKUP
+
LOAD SAVE
INTERNAL/DATA CARD
BACKUP
LOAD SAVE
INTERNAL/DATA CARD