Table of Contents
Advertisement
Song Function Parameters
The song function parameters assigned to pads 1 - 8 are as follows.
• Pad 1 (BAR LENGTH)
Sets the length of a bar in the song. The maximum number is 300 bars for each song. This parameter can be
specified for each song individually.
Setting values: 1 - 300 (Default settings: 4)
If a song is set to a longer time after recording, blank bars are added to the end of the
NOTE
song. If set to a shorter time, the excess bars are cut off.
• Pad 2 (QUANTIZE)
Sets the quantization value used for recording (
Setting values: 4, 8, 12, 16, 24, 32, Hi (Default settings: 16)
• Pad 3 (TIME SIG)
Sets the time of the song. This parameter can be specified for each song individually.
Setting values: 2 (2/4), 3 (3/4), 4 (4/4) (Default settings: 4)
After recording is complete, the beat of a song cannot be changed.
NOTE
• Pad 4 (SHIFT)
Shifts the playback timing of the ST-224 back and forth. This is useful for example to match the playback to the
timing of external equipment. The setting is made in 1-tick units (1/24 of a quarter note), and the maximum
setting is 2 bars.
Setting values: -48 to +48 (Default settings: 0)
When this item is changed, the playback data stored for a song are rewritten.
NOTE
Excess portions at the beginning and end will be cut off.
• Pad 5 (PRE COUNT)
Determines whether the metronome sound is heard before recording.
0:
No pre-count
1:
Recording starts after pre-count of 1 measure.
2:
Recording starts after pre-count of 2 measures.
PAd: Recording starts as soon as a pad is hit.
Setting values: 0, 1, 2, PAd (Default settings: 1)
• Pad 6 (SWING)
Sets the swing (rhythm fluctuation) during song playback. Higher values result in more pronounced swing. This
parameter only affects playback, it does not alter the recorded data of a song.
Setting values: 50 - 75 (Default settings: 50)
• Pad 7 (CLICK VOLUME)
Sets the volume of the metronome click.
Setting values: 0 - 100 (Default settings: 70)
• Pad 8 (MIDI)
The internal sequencer can be controlled either by the internal clock (int) or by the MIDI clock derived from
MIDI messages sent from external equipment (Midi).
Setting values: int, Midi (Default settings: int)
NOTE
When "Midi" is selected, song recording
is not possible.
p.
49). This parameter has no effect on song playback.
While this song parameter is called, the MIDI
HINT
HINT
receive channel can be selected by holding
down any of the [BANK 1] - [BANK 3] keys and
using the [-] [+] keys.
53
Advertisement
Table of Contents
