Zoom Sampletrak ST-224 Operation Manual page 21

Zoom sampletrak operation manual st-224
Table of Contents

Advertisement

If you press the [CAPACITY] key, the approximate remaining
HINT
HINT
sampling time in seconds (calculated for HiFi and Mono) will appear
on the display.
4
STEP
To switch between mono and stereo, use the [MONO/STEREO] key.
The indication "Mn" (Mono) or "St" (Stereo) will appear on the display.
To change the setting, hold down the [MONO/STEREO] key and use
the [-] or [+] key. (The default setting is "Mono".)
The grade and mono/stereo selection can be made individually for
NOTE
each sample. Remember that using stereo sampling will reduce the
available sampling time and the number of samples that can be
played simultaneously by half.
5
STEP
Press the [RECORD] key and then immediately start playback of the sound source.
In manual sampling, the LED of the [RECORD] key stays lit as soon
as you press the key, and sampling starts.
6
STEP
To end sampling, press the [PLAY/STOP] key.
Sampling ends as soon as the key is pressed.
Level
RECORD
If sampling is not stopped manually, it continues until the main
NOTE
memory is full or the maximum sampling time is reached. Sampling
will automatically end at that point.
7
STEP
To check the result of the process, press the [PLAY/STOP] key.
The sampled sound is played back for as long as the key is held
down (gate playback).
To check the status of sampled sound, press the [GRADE]
HINT
HINT
(or [MONO/STEREO]) key then the value with the number of the
sample is shown on the display.
• To erase the new sample and redo the sampling process
Press the [ERASE] key twice (
• To keep the new sample and continue sampling the same source
Repeat steps 2 - 7.
• To assign the new sample to a pad
Proceed to step 8.
The playback start time and end time in the sample can be changed
HINT
HINT
later (
p.
if there is a blank at the beginning or the end of the sample.
Time
PLAY/STOP
Sampling start
Sampling end
Manual sampling
p.36), and then repeat steps 2 - 7.
29). Therefore repeated sampling is not necessary even
RECORD
Sample
MONO
STEREO
PLAY/STOP
PLAY/STOP
21

Advertisement

Table of Contents
loading

Table of Contents