Table of Contents
Advertisement
Windows Vista:
If a message tells you that Windows can't verify the
publisher of the driver software, select Install this driver
software anyway.
If you are prompted to enter your user name and password,
remember that they are case-sensitive:
5
When you complete the installation and setup, click Finish to
update your modem and close the Install Assistant.
Congratulations! You have established communication and your
computer is now connected to the Internet.
Macintosh and Linux
Installation
There is no software installation for Macintosh and Linux systems.
Windows users: If you did not run the Install Assistant on the CD,
follow these instructions to install the hardware and configure your
X4.
Installing the Hardware
1
Shut down and power off your computer.
2
Connect the modem to the computer's Ethernet jack or to a
network device (such as a hub). If you are using a Windows
Chapter 1: Installation Instructions
9
Advertisement
Table of Contents
