Zoom 1064 Series User Manual page 10

computer, you also have the option of connecting to your
computer's USB port. However, we recommend that Windows
users connect to an Ethernet jack if one is available.
If you are using a computer's Ethernet port: Plug one
end of the Ethernet cable into the modem's
ETHERNET LAN port and plug the other end into
your computer's Ethernet port.
If you are using a Windows computer's USB port: Plug
one end of the USB cable into the modem's USB port and
the other end into your computer's USB port.
If you are connecting the X4 directly to a hub, switch,
wireless access point, or other network device: Plug
one end of the Ethernet cable into the modem's
ETHERNET port and the other end into the network
device's Ethernet jack (which is typically called an Uplink
or Expansion port).
The modem's ETHERNET LAN or USB connector is at
the back of the modem.
Tip: Windows users can connect two computers to the X4,
one on the Ethernet jack and the other on the USB port, and
share Internet access.
3
Plug the power cube into a power strip or wall outlet and then
plug the power cube's other end into the modem's POWER
jack.
Important!
Use only the power cube shipped with the X4. Other power
cubes may damage your hardware.
After you plug in the power cube, the POWER light on the
front panel of the modem should become steady on, and the
10 ADSL X4 User Guide