Zoom 1064 Series User Manual page 16

6
Verify that your Internet connection is working. Open your
Web browser and try to connect to a familiar Web address.
If you connect successfully, your installation is complete
and you are ready to browse the Web!
Congratulations! You have completed all you need to do to
get your computer on the Internet. The remainder of this
user's guide is for troubleshooting and for advanced users who
need information about status monitoring and advanced setup
options.
Important!
If you did not connect, see Appendix D: Troubleshooting
on page 53.
Configuring the X4 Manually
Some users may need to configure the X4's IP settings manually,
instead of having the modem automatically configure itself.
Typically, you would manually configure your modem if:
•
You already have the VPI, VCI, and Encapsulation settings
from your Internet service provider.
•
You have a static IP address that you plan to use with the X4.
If this is the case, skip this section and continue with Using
Static IP Addressing on page 19.
•
The auto configuration process was unable to find your
settings.
Manually configuring the modem requires that you log in to the
Zoom Configuration Manager and enter information on its
Basic Setup page. (If you need help logging in, see page 12.)
1
On the Basic Setup page, ensure that the MANUAL option
button is selected.
2
Do the following, depending on whether you know your VPI,
VCI, and Encapsulation settings:
16 ADSL X4 User Guide