Nfc Pairing; Re-Pair The Usb Adapter - Poly Voyager 5200 UC User Manual

NFC pairing

Re-Pair the USB adapter

NFC pairing is an option if you have no more than one other device already connected. NFC pairing
will not work if there are two devices connected already.
On your mobile phone ensure NFC is enabled and your phone's display is unlocked. (Phones may
1
vary and some phones may not have NFC support.)
With the headset powered on, lay the headset on the back of phone near the NFC tag on phone as
2
shown until NFC pairing completes. If necessary, accept the connection.
Insert the USB Bluetooth adapter into your laptop or computer and wait for your computer to
1
recognize it.
Put your USB Bluetooth adapter into pair mode by gently pressing and holding the pair button
2
with a pen or paperclip until the USB Bluetooth adapter flashes red and blue. Put your headset in
pair mode.
Put your headset in pair mode.
3
Pairing is successful when you hear "pairing successful" and the Bluetooth USB adapter LED is
solid blue.
11