Charge case overview USB Bluetooth adapter LEDs Locate the serial number on your headset Locate the serial number on your charge case Load software Update your Poly device Adjust the fit Change eartip size Switch ears Charge Check headset battery status...
Page 4
Play or pause audio Track backward Track forward Voice assistant (smartphone feature) Use sensors Reset the sensors Disable sensors Exit DeepSleep mode Advanced features Choose Noise Block setting Use USB-C to USB-A adapter What's in the box Troubleshooting Support...
Overview Review your new headset system. Headset overview Use your headset for call and media control. Siri/Google Assistant Table 1-1 Headset icon descriptions Icon Control Volume up and down buttons Indicator light Bluetooth pairing Slide up and hold for 2 seconds. For more, see Pair to mobile device on page Power...
NOTE: The USB Bluetooth adapter is stored inside of the charge case. USB Bluetooth adapter LEDs Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device. Plug it into your computer to connect to high-fidelity computer audio. NOTE: Your adapter's USB connection type and design may vary, but the function is the same.
Table 1-2 Standard LEDs (continued) LED behavior Description Solid red Mute active Flashing purple Streaming media from computer Table 1-3 LEDs with Microsoft Teams* LED behavior Description Flashing red and blue Pairing Solid purple Microsoft Teams connected Flashing blue On a call Solid red Mute active Pulsing purple...
Page 8
■ Open the charge case to find the serial number SN: XXXXXX (typically 6 digits). SN: XXXXXX TIP: Take a photo with your smartphone for a better view of the serial number. Chapter 1 Overview...
Load software Download the Poly Lens app to get the most out of your device. Some softphones require the installation of Poly software to enable device call control (answer or end a call and mute) functionality. NOTE: Administrative privileges may be required to download the desktop application.
Adjust the fit Wear your headset correctly for the best call and sound quality. Slide the headset over and behind your ear, then press gently toward your ear. NOTE: Remove your eyeglasses before wearing the headset for the best fit. Rotate the microphone boom until it is pointed toward your mouth.
With the eartip pushed in, turn counterclockwise to unlock. Remove the eartip from the slot. Switch ears Wear your headset on either ear. ■ Rotate the boom upwards, and then twist it around so the eartip is on the other side of the headset base before lowering the mic boom.
Charge Charge your headset with the provided USB-C charge cable or accessory charge case. Charge your case with the provided USB-C charge cable. To charge your headset, do one of the following: ● Insert the supplied USB cable into the headset charge port and plug into a computer or USB charging device.
With your headset powered on and smart sensors active, put on your headset and listen to the voice alert. ● Power on your headset and listen to the voice alert. ● View the battery status in Poly Lens. Table 4-1 Headset LED status descriptions Headset LED Headset battery status...
Your headset announces when your battery status is low. The following table describes the battery status prompts. NOTE: These prompts are available in several languages. You can change your prompt language in Poly Lens. Table 4-2 Headset battery status voice prompts Battery status...
Pair to PC with Bluetooth direct Quickly pair to your PC with Bluetooth direct PC pairing and Poly Lens Desktop. Poly Lens Desktop improves softphone call control and call quality. This feature requires Poly Lens Desktop 2.0. Download the app at hp.com/lens-app.
When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid. Load Poly Lens Desktop by visiting hp.com/lens-app. This app enables you to customize your headset behavior through advanced settings and options.
Windows To configure your Bluetooth USB adapter for streaming media in your PC, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT700 set it as the Default Device and click OK. To pause music when you place or receive calls, go to Start menu > Control Panel >...
Manage calls Manage calls with your headset. Answer a call Choose a method to answer a call. ■ Choose one of the following: ● Put the headset on to answer a call. ● Say “answer” after call is announced. ● Press the Call button.
Hold a call Use your headset to place an active call on hold. Press and hold the Mute button for 2 seconds to hold the call. The LEDs flash red. To resume call, hold the Mute button again for 2 seconds. The LEDs return to pulsing red.
Basics Control features using the headset buttons. Siri/Google Assistant Power on Power on your headset. ■ To turn on the headset, slide the Power button to reveal green. Adjust the volume Increase or decrease the volume of your headset audio. ■...
Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls. Use sensors Smart sensors respond when you put on or take off your headset. Customize the sensors in Poly Lens. The following table describes the default sensor settings. Table 7-1 Headset active sensor behavior...
(not included). Then place the headset on a flat, non-metallic surface for more than 10 seconds. Disable sensors Disable your headset smart sensors in Poly Lens or by using a button press while your headset is idle. ■ Simultaneously press and hold the Call and Mute buttons for 5 seconds.
Exit DeepSleep mode If you leave your headset powered on but out of range of your paired device, the headset conserves power by entering DeepSleep mode after 90 minutes. ■ Power on the headset by pressing the Call button. Exit DeepSleep mode...
Limit the amount of noise and nearby conversation transmitted through your microphone while on a call using Noise Block. Select your preferred Noise Block setting in Poly Lens. Open Poly Lens and go to Settings > Advanced > Close Conversation Limiting. Choose the setting that matches your work environment. Option...
Page 25
● Connect the USB-C charge cable to the adapter and connect to a USB-A port. The USB-C to USB-A adapter can be used with wall adapters as well. TIP: Use the lanyard to attach the adapter to your cable. Use USB-C to USB-A adapter...
What's in the box Contents may vary by product. Figure 9-1 Headset Figure 9-2 Charge case Figure 9-3 USB Bluetooth adapter Figure 9-4 USB-C cable Figure 9-5 USB-C to USB-A adapter Figure 9-6 Eartips (S, L) Figure 9-7 Quick start guide Chapter 9 What's in the box...
Poly Lens Desktop is required to pair your BT700 USB Bluetooth adapter to another supported Poly adapter to another device. Your Bluetooth adapter remembers audio device? up to 2 supported Poly audio devices, but connects to only one at a time. Review Configure USB adapter for streaming media on page Why should I use the USB-C to Use the adapter if you don’t have USB-C ports available on...
Page 28
You may need to reset your sensors. Review Reset sensors on page ● Disable HD Voice (Wideband Audio) via Poly Lens, as this setting may be incompatible with your phone. I want to customize my headset Customize your device settings with Poly Lens. Download: features.
Page 29
Microsoft Teams. Review Launch Microsoft Teams (Teams using my headset? model only) on page Set your target softphone by going to Poly Lens Desktop. ● (Teams model only) Does my Yes, while your headset is optimized for Microsoft Teams, you Microsoft Teams-enabled headset can configure it to use it with other supported softphones.
Support NEED MORE HELP? support.hp.com/poly HP Inc. 1501 Page Mill Road Palo Alto, CA 94304, U.S.A. 650-857-1501 HP REG 23010, 08028 Barcelona, Spain HP Inc UK Ltd Regulatory Enquiries, Earley West 300 Thames Valley Park Drive Reading, RG6 1PT United Kingdom 台灣惠普資訊科技股份有限公司...
Need help?
Do you have a question about the Voyager Legend 50 UC and is the answer not in the manual?
Questions and answers