Kärcher ICH 80/16 Ps Manual page 29

Methyl ethyl ketone MEK (butanon,
ketone)
Methyl acetate (ester)
Diesel oil
Diesel fuel
Petroleum (hydrocarbons)
Toluol (aromatic compounds)
Surfactants
Soap solution, dilute (anionic ten-
side)
Wash alkali / detergent, diluted
(non-ionised tenside)
X = suitable
0 = neutral
-- = unsuitable
Acids
ATTENTION
– The material will be worn off faster
when using hydrochloric or sulfuric ac-
ids; therefore it must be rinsed/neutral-
ised immediately!
– Contaminated acids will decrease the
resilience!
– Enquire with Kärcher if needed!
solvents
DANGER
– The explosion protection must be taken
into consideration when operating with
solvents as well as in EX zones!
– Maximum pressure with solvent opera-
tion: 5 MPa
– Maximum flow volume with solvent op-
eration: 50 l/min
ATTENTION
When operating with solvents, the sealing
materials are less resistent, therefore they
must be flushed immediately after use! En-
quire with Kärcher!
Other cleaning liquids
If other cleaning liquids are used, their resil-
ience must be checked by means of the ma-
terials list! These cleaning liquids can only
be used after being released by Kärcher!
-- X --
-- X 0
0 -- --
0 -- --
X -- --
-- -- --
X X X
0 0 0
EN
-- < 50 - TRGS 727
< 25 - 2014/68/EC
-- < 50 - TRGS 727
< 25 - 2014/68/EC
0 < 50
0 < 50
X < 50 - TRGS 727
< 25 - 2014/68/EC
X < 50 - TRGS 727
< 25 - 2014/68/EC
X max.
0 max.
11
-
< 3000 < 60
< 3000 < 60
< 3000 < 60
< 3000 < 60
< 3000 < 60
< 3000 < 60
max. max.
max. max.
29