Table of Contents
Advertisement
9.2
Configuration in ibaLogic-V5
Other documentation
Combined with ibaLogic-V5, an ibaPADU-S-IT-2x16 device can be used to realize indi-
vidual signal pre-processing or stand-alone applications. You find the basic way of pro-
ceeding description in the separate ibaPADU-S-IT-2x16 manual. This manual describes
only the signals belonging to this module.
The signals can be configured in the I/O Configurator of ibaLogic-V5. Open the I/O Con-
figurator in the "Configuraton – I/O Configurator" menu. When you click on the <Update
Hardware> button, then ibaLogic detects the module.
ibaMS16xAO-10V has the following signal groups:
1. Outputs
2. Inputs
Figure 13: ibaMS16xAO-10V outputs
24
Manual
Issue 1.4
ibaMS16xAO-10V/-20mA
Advertisement
Table of Contents
