Reset Channel Errors - IBA ibaMS16xAO-10V/-20mA Manual

ibaMS16xAO-10V/-20mA
 Name
You can enter a name for the signal and two additional comments (click on the
icon in the Name field).
 Expression
For each output you can specify a signal using the expression builder
can be linked mathematically or logically.
 Min/Max
Low end and high end of the output range.
 Active
Enabling/disabling the signal.
9.1.3

Reset channel errors

In the "Outputs" menu, in the "Reset channel errors" tab, the hardware errors of the quad
roots of the outputs can be reset in two ways:
 Manually using the <Reset> button
 Automatically by an output signal
The following settings apply to the "Reset channel errors" tab.
Figure 12: ibaMS16xAO-10V – Outputs – "Reset channel errors" tab
 Name
The quad roots have default names, you can enter two additional comments (click
on the
 Expression
Using the expression builder
a hardware error.
 Active
Enabling/disabling the signal.
icon in the Name field).
Manual
you can specify an output signal in order to reset
Issue 1.4
. Signals
23