Table of Contents
Advertisement
ibaMS8xICP
9.2
Configuration in ibaLogic-V5
Other documentation
Combined with ibaLogic-V6, an ibaPADU-S-IT-2x16 device can be used to realize indi-
vidual signal pre-processing or stand-alone applications. You find the basic way of pro-
ceeding description in the separate ibaPADU-S-IT-2x16 manual. This manual describes
only the signals belonging to this module.
9.2.1
Configuring signals
The signals can be configured in the I/O Configurator of ibaLogic-V5. Open the I/O Con-
figurator in the "Tools – I/O Configurator" menu. When you click on the <Update hard-
ware> button, then ibaLogic detects the module.
Figure 11:
The analog input channels are displayed in the „Inputs" tab.
Inputs ibaMS8xICP
Manual
Issue 1.7
23
Advertisement
Table of Contents
