Update; Update Via Web Interface - IBA ibaMS16xAO-10V/-20mA Manual

ibaMS16xAO-10V/-20mA
8.3

Update

An update can be installed in two different ways:
 Web interface (only with ibaPADU-S-IT-2x16)
 ibaPDA
No matter which of the both ways you choose to install an update: the progress of the
update is shown by the LEDs L5 ... L8. Beginning with L5, the LEDs are flashing one
after another, at first in orange and then in green and at a slower rate. When the update
is completed, the device reboots automatically.
Important note
When updating the iba-modular system, a possible autostart of the ibaLogic PMAC is
deactivated and the existing ibaLogic-V5 application deleted. Furthermore, an update
of the ibaLogic-V5 software (ibaLogic Clients) might be necessary.
8.3.1

Update via Web interface

Important note
The Web interface is available only with the central unit ibaPADU-S-IT-2x16.
 Start the Website of the iba-modular system in your browser and select the central
unit.
 On the "update" tab, click on the <Browse...> button and choose the
<padusit2x16_ v[xx.yy.zzz].iba> update file.
 By clicking on <Start Update>, you start the update.
Figure 4: Update via Web interface
Manual
Issue 1.4 17