Table of Contents
Advertisement
ibaMS16xDI-24V/-220V
9.2
Configuration in ibaLogic-V5
Other documentation
Combined with ibaLogic-V5, an ibaPADU-S-IT-2x16 device can be used to realize
individual signal pre-processing or stand-alone applications. You find the basic way of
proceeding description in the separate ibaPADU-S-IT-2x16 manual. This manual
describes only the signals belonging to this module.
9.2.1
Configuring signals
The signals can be configured in the I/O Configurator of ibaLogic-V5. Open the I/O
Configurator in the "Tools – I/O Configurator" menu. When you click on the <Update
hardware> button, then ibaLogic detects the module.
Figure 15: Inputs ibaMS16xDI-24V
Manual
Issue 1.4
25
Advertisement
Table of Contents
