Doubling the Seed Rate
Seed rates can be doubled by using the 26-tooth
sprocket and extra chain links included with the seeder.
See Figure 2-8.
Procedure is as follows:
1. Loosen drive chain.
Figure 2-8: Speed Up Kit
2. Open chain at connector.
3. Remove 1/4" roll pin in 13- tooth sprocket and 3/4"
4. Exchange sprockets to new positions and replace roll
5. Add extra chain links as provided with this seeder.
Adjust chain tension as shown on page 4-3.
Figure 2-9: Doubling the Seed Rate
nut on 26-tooth sprocket. See Figure 2-9.
pin and nut.
OPERATION
2-5