Minimum Information Required for Technical Assistance ..........16 Return Merchandise Authorization - RMA ..............16 Specifications ....................17 Product specifications ....................17 Connections ........................ 17 Temperature range ..................... 17 Mechanical specifications ................... 17 Approvals and certificates ................18 Danalock V3-BT, Technical Manual v.1.5, May 2017 Page 2...
Page 3
All other trademarks are the property of their you leave. respective owners. Product installation disclaim: Depending on how your deadbolt Release Notice is installed, to unlock your Danalock you will turn it the This document is release 1.4 of the V3-BT, Technical Manual. opposite direction that deadbolt turned.
Page 4
Industry Canada requirements RSS-GEN, RSS-102, RSS-247. ACTUALLY PAID BY RESELLER FOR THE PRODUCT. TO The V3-BT product complies with Part 15 of the FCC rules and THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, with Industry Canada license exempt standard(s). Operation is...
Page 5
V3-BT MIC (Japan) The V3-BT product complies with the Japanese Ordinance concerning Technical Regulations Conformity Certification etc. of Specified Radio Equipment Article 2 clause (1) Item (19) for radio terminal equipment supporting Bluetooth Low Energy 2400-2483.5 MHz. ACMA (AUS/NZ) The V3-BT product complies with the Australian/New Zealand...
Avoid Body Contact with Device during Operation Do not operate the V3-BT in direct contact with your body. Maintain at least 8 inches (20 cm) separation between the device and any parts of your body. Danalock V3-BT, Technical Manual v.1.5, May 2017...
V3-BT. EN 14846 classifications N/A are used. Fire doors The V3-BT series is not approved for use with fire doors. EN 14846 suitability for use on fire/smoke doors classification grade=0. Safety No requirements are defined in the EN 14846 classification scheme.
The following precautions apply: • The V3-BT unit is not intended for handheld use or to be worn on the body. • It is recommended that a minimum separation of eight 8” inches (20 cm) is to be maintained between the V3-BT unit and any persons’...
Page 9
EITHER THE IEC 62311 FOR BLUETOOTH LE OR FCC/IEEE/ICNIRP REQUIREMENTS FOR BLUETOOTH LE. The V3-BT unit is not intended for handheld use or to be worn on the body. A minimum separation of eight (8”) inches (20 cm) is to be maintained between the V3-BT and any persons’...
This privacy policy governs your use of the software application ”danalock App” for mobile devices that is created by Poly-Control ApS. The Application controls the use of the electronic door locking device Danalock, and only works with iPhone 4s / Android 4,4 or newer smartphones with Bluetooth Smart or Z-wave Technology.
States. Contact us If you have any questions regarding privacy while using the Application, or have questions about our practices, please contact us via email at mail@danalock.com Delivered standard content The delivered standard package content includes the following items: Outside US 1 x Danalock (incl.
V3-BT Installing the unit Practical installation advice • Please follow the installation guide carefully. It is available on the danalock site that is found at https://guide.danalock.com/: • Be aware that multiple installation guides exist. The installation guides are targeted for the specific models.
Constant green till fails Lock failed during unlatch then one red blink Identification of the lock Constant white for 1 sec Red light flashes every Critical battery level 5 minute Danalock V3-BT, Technical Manual v.1.5, May 2017 Page 13...
Bluetooth devices. Electro mechanical lock classification The V3-BT is categorized as an electro mechanical lock for operation on the inside of a door instead of a pure mechanical wring. The lock incorporates an electromechanically operated motor for opening and closing the door based on either a finger press (from the inside) or a secure locking/unlocking command transmitted over a radio communication interface.
The warranty does not cover misuse, wrong installation or damage due to a faulty installation or wrong maintenance. The invoice act as the proof of warranty, so please keep it as reference for any warranty complaints. Danalock V3-BT, Technical Manual v.1.5, May 2017 Page 15...
Minimum Information Required for Technical Assistance If you or a user reports difficulty with a V3-BT unit, it is helpful to retrieve directly from the unit all current configuration settings and the message log data etc., that is accessible by the technical support when they receive the following information about the unit.
V3-BT Specifications Product specifications The V3-BT unit is with integrated antennas and battery Connections Operational voltage (supply voltage): 4 x 3V DC (12V DC) Standby time on the battery 450 days for V3-BT models Temperature range In active running mode -20ºC to +40ºC...
(N/A is not applicable for V3-BT): FCC and IC Statements The V3-BT product contains radio transmitters that comply with CFR 47 Part 15.247 of the FCC rules and with RSS-GEN, RSS-102 and RSS-247 of Industry Canada requirements. Notice statements according to CFR 47 Part 15.19 / RSS-GEN: The V3-BT product complies with Part 15 of the FCC rules and with Industry Canada license exempt standard(s).
Page 19
• The V3-BT complies with the requirements of the ordinance regulating Radio Equipment (2005-08), Art2. item 19 for Bluetooth LE applications. EEC/ International • The V3-BT product complies with the essential requirements of the RED directive 2014/53/EU directive with respect to the EMC requirements, safety and radio spectrum matters.
Page 20
V3-BT The V3-BT product complies with the essential requirements of the RED Directive 2014/53/EU as stated by the EC Declaration of Conformity. Certificates and Declaration of conformity (DOC) statements can be downloaded from the danalock website: https://doc.danalock.com/ Danalock V3-BT, Technical Manual v.1.5, May 2017...