danalock V3 SCANDI Quick Manual
Hide thumbs
Also See for V3 SCANDI:
- Instructions manual (20 pages) ,
- Mounting manual (24 pages) ,
- Easy install (2 pages)
Related Manuals for danalock V3 SCANDI
Summary of Contents for danalock V3 SCANDI
- Page 1 How to mount your Danalock V3 SCANDI on a door DV3s SCANDI 3DmountingVideo Quick-guide: Tools needed and parts involved in the procedure on your existing lock. https://danalock.com/danalock-v3-scandi-guide.html 28.4.2017 9.41 Sivu 1 / 8...
- Page 2 2. Remove the current door lock First you have to remove the existing thumb turn on the inside of the door. 3. Normal tailpiece length Most doors have tailpieces that extends 10 mm https://danalock.com/danalock-v3-scandi-guide.html 28.4.2017 9.41 Sivu 2 / 8...
- Page 3 If the tailpiece is less than 10 mm long from the door surface, an extra tailpiece can be found in the Danalock box. (See the next ill. no 4). Danalock V3 works with a tailpiece length up to max. 35 mm. If the length exceeds 35 mm you will have to shorten it.
- Page 4 Use the 2 screws that originally held the thumb turn to attach the back plate. 6. Give the tailpiece the right length To avoid damaging the danalock you will have to shorten the new cylinder tailpiece to max. 35 mm from the door surface.
- Page 5 Danalock. 8. Fit the tailpiece to the middle of the housing base Fit the Danalock over the back plate. Make sure the tailpiece hits the slide in the middle of the adaptor. 9. Align the platemarks...
- Page 6 NOTE: If you need to unfasten and retry, see “Uninstall instructions” at the end of the manual. 11. Activate batteries Pull out the plastic tab to activate the batteries. A light will flash to confirm the Danalock is ready. https://danalock.com/danalock-v3-scandi-guide.html 28.4.2017 9.41 Sivu 6 / 8...
- Page 7 12. Before downloading the app Your Danalock is now attached to the door. Download and open the Danalock app to finish setting it up. Leave the door open, so the lock isn’t influenced when calibrated. 13. Download the Danalock App Go to Google Play or App Store and download the Danalock App.
- Page 8 A guide will now lead you through the installation and configuration of your Danalock. Dismount instructions If at any time you need to dismount the Danalock from your door, insert a pen tip into the hole at the top inner edge of the lock and press while turning the lock counter-clockwise until the lock releases.