Language; Factory Settings - TechniSat DIGITRADIO 370 CD BT Instruction Manual

Colour scheme
Here you can specify which colour scheme should be used for the displays.
> Use / to select the [Colour scheme] item. You can choose between Deep
Black and Steel Blue. Press the ENTER button to save.
Backlight
> Use / to select the [Brightness] item.
[Operation] regulates brightness in the normal operating status. You can
choose from [High], [Medium] and [Low] brightness intensities. Use / to
select the brightness level and press ENTER to save.
[Standby] regulates the brightness in standby mode. You can choose from
[High], [Medium] and [Low] brightness intensities. Use / to select a
brightness level and press ENTER to save.
[Auto Dim] dims the display automatically (with the option [On] selected) to
the Low brightness value after 10 seconds without operating the radio.
When the [Off] option is selected, the display will be permanently lit with the
brightness selected under [Operation]. Press ENTER to apply the setting.

13.3 Language

> Press the MENU button and use the / buttons to select the [System
settings] > [Language] item, then press ENTER.
> Use / to select one of the available languages and confirm by pressing the
ENTER button.

13.4 Factory settings

If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
factory settings to delete all the saved stations and launch a new scan.
> Press the MENU button and use the / buttons to select the [System
settings] > [Factory settings] item, then press ENTER.
> Use / to select the [Yes] option, then press ENTER to reset to the factory
settings.
All previously stored stations and settings will now be deleted. The device is
now in the same status as when delivered.
74