Operations Menu - Watlow PM LEGACY PM3 User Manual

Upon power up of the control, using
the advance key will scroll through
the various prompts found in the
Operations Menu. At any point within
the Operations menu to return to
the default display push the Reset
key.

Operations Menu

[````] PAr1
[````] PAr2
[`ll; s ] Limit Low Set Point
[`lh; s ] Limit High Set Point
[`A; l o] Alarm Low Point
[`A; h i] Alarm High Point
[`i; C a] Calibration Offset
PM3/PM6 LEGACY™ Express Limit
Operations Menu
Display Parameter Name Description
Limit Low Set Point
[`LL; S ]
Set the low process value that will trigger the limit.
[ LL.S]
Appears if: Limit sides set to low or both.
Range (Defaults are shown bold)
-1,999.000 to 9,999.000°F or units
-1,128.000 to 5,537.000°C
Units, 32°F or 0°C
Limit High Set Point
[`Lh; S ]
et the high process value that will trigger
S
[ Lh.S]
the limit.
Appears if: Limit sides set to high or both.
Range (Defaults are shown bold)
-1,999.000 to 9,9
-1,128.000 to 5,537.000°C
Units, 300°F or 150°C
Alarm Low Set Point
[`A; L o]
[ A.Lo]
Process - set the process value that will trigger a
low alarm.
Appears if: Alarm Type (A.ty) is set to Process
Alarm.
Range (Defaults are shown bold)
-1,999.000 to 9,999.000°F or units
-1,128.000 to 5,537.000°C
Units, 32.0°F or 0.0°C
Alarm High Set Point
[`A; h i]
[ A.hi]
Process - set the process value that will trigger a
high alarm.
Appears if: Alarm Type (A.ty) is set to Process
Alarm.
Range (Defaults are shownin bold below)
-1,999.000 to 9,999.000°F or units
-1,128.000 to 5,537.000°C
Units, 300.0°F or 150.0°C
Calibration Offset
[`i; C A]
Set an offset value for a process output.
[ i.CA]
Appears if: Always
Range (Defaults are shown bold)
-1,999.000 to 9,999.000°F or units
-1,110.555 to 5,555.000°C
0.0
• 1 8 •
99.000°F or units
O per at i o ns M e nu