Outputting Paper; Print Surface; Tray Capacity - Fuji Xerox ApeosPort 4570 Reference Manual

Outputting Paper

Print Surface

The print surface refers to the surface printed on in single-sided printing (the first page in double-sided print-
ing).
Trays other than Side Tray: Face-down
Side Tray: Face-up
Note Paper cannot be output upside down.
Paper size
Paper weight
Long paper
Long paper cannot be used for double-sided printing.
Paper size
Note The paper cannot be output to the Center Tray depending on the type of finisher installed.

Tray Capacity

A4 paper
Center Tray With Extra Center Tray
Without Extra Center Tray
Extra Center Tray Without offset
With offset
Side Tray
Note The tray capacity varies depending on the following conditions.

- Paper size, paper weight
- Paper types (coated paper or uncoated paper, paper curl height, etc.)
- Single-sided prints / double-sided prints
- Image density
The output operation automatically stops when the Center Tray becomes full.

Width
Length
Length
Without offset
With offset
Without offset
With offset
Models equipped with Finisher A
Models not equipped with Finisher A
Single-sided printing
88.9 to 320 mm
98.4 to 482.6 mm
2
52 to 300 g/m
Up to 1,200 mm
-17-
ii Basic Operations of the Machine
Double-sided printing
128 to 320 mm
139.7 to 482.6 mm
400 sheets
200 sheets
250 sheets
125 sheets
200 sheets
250 sheets
125 sheets
100 sheets