Heat/Cool Mode Change - Salus HTRS230V(30) Full User Manual

5.2 Heat/cool mode change

The heating / cooling mode for the thermostat can be changed manually or automatically via „CO" terminal. If 230V power is applied to the „CO" terminal
- then thermostat automatically switches to cooling mode. If you use this function in automatic mode, set the d18 parameter value to „1".
MANUALLY:
1
3 sec.
Hold button for 3 seconds to
enter the menu.
Then use and to choose
heating/cooling settings.
Confirm by button.
AUTOMATICALLY:
By external ON/OFF switch:
1
Wejście NSB
NSB output
HTRS 230
CO
/
L
L
The heating / cooling mode for the thermostat
can be changed manually or automatically via
„CO" terminal. If 230V power is applied to the
„CO" terminal - then thermostat automatically
switches to cooling mode.
20
2
Set thermostat for heating using
Confirm by
T30NC
HTRS 230
N
N
3
and buttons.
button.
2
SL
CO KL08 NSB
L L
N N
If we are using this option then
d18 parameter should be set to „1".
Move in settings using
buttons.
Confirm by
3
and
button.