Work Modes - Salus HTRS230V(30) Full User Manual

4. Work modes

HTRS230V(30) offers a few work modes. Frame on a given icon indicates which mode is currently active. In manual mode
level is maintained. HTRS230V(30) follows MASTER thermostat when AUTO mode is active („A" icon) - please refer to 2.5 connection description chapter.
Detailed description of work modes is located below:
- Frame - means that the work mode is active (the icon of the work mode must be in the center of the frame). For example:
- means that comfort temperature mode is active
- means that comfort temperature mode is inactive
- Comfort temperature mode - pre-defined setpoint temperature. Usually set when we are indoors. The highest maintained temperature in
heating mode or the lowest if thermostat works in the cooling system. Acting alone works as a manual mode. Temperature range: from 5°C to 35°C.
- Economic temperature mode - pre-defined setpoint temperature. Usually set at night or when we are out of the house. Acting alone works as a
manual mode. Temperature range: from 5°C to 35°C.
- Automatic mode temperature (schedule) - follows MASTER thermostat. It adopts it's mode. You can override the auto mode by changing the
temperature setpoint.
- Frost protection mode - usually used during extended periods of absence or during the holidays (only available in heating mode). Temperature
range: from 5°C to 17°C.
18
- the hand icon will appear.
Example - comfort temperature mode setpoint editing:
1
Use or buttons to switch
between work modes. Choose
in this case.
3
Confirm by button.
2
Use or buttons set
temperature setpoint.
4
Thermostat will go back to the main
screen after saving the settings.
or only one temperature
3