Jung Smart Visu Server Quick Start Manual page 63

2. Overview
The presence simulation can be
implemented in your Smart Visu Server
with just a few steps.
The table here gives an overview of
the necessary steps.
The individual steps are described in
detail on the following pages.
STEP
1. Connect the Smart Visu Server to the home network
2. Make a connection to the KNX bus
3. Set up areas and functions
4. Create actions
5. Create action groups and combine actions
6. Duplicate action group
7. Save project
SMART VISU SERVER + PRESENCE SIMULATION 3
PAGE
6
7
8
9
10
11
12