Jung Smart Visu Server Quick Start Manual page 110

14.2 Creating the email messaging function
In the next stage you specify the general settings for the function. After this you will write a few basic settings.
1
1. Select a zone, for example first floor,
kitchen or guest bathroom in the
Areas & Functions tab under Areas
2. Now, under Functions, create the Wind
speed limit value email message [2].
2
3
3. Under Functions, select the wind
speed limit value email message
[1]. you have just created.
6
4. Now, under Functions, create the
[3] wind sensor email message
5. Select Display 2-byte (floating point)
as the value [5].
6. If you tap Symbol [6] you can select
the symbol you want to use for the
wind speed limit value email mes-
sage.
4
5
7. Enter a description [7], e.g.: should
[4]. send message if windspeed exceeds
specified value.
8. Enter the email address
required recipient in addition to the
CC and BCC recipients.
9. Last of all, enter an individual
and an individual message
E-MAIL MESSAGING 23
4
7
8
9
[8] of the
subject
[9].