7.3 Connect loudspeaker to KNX push-button sensor (step 1 of 2)
The following steps help you with the set-up for controlling Sonos with the KNX push-button sensor.
2
1
1.
Create a function for the KNX
push-button sensor. Select the area
Kitchen
[1], assign a name e.g.
KNX -> Sonos Kitchen (push-button)
[2].
3
2.
Select the function type
Virtual Dim-
mer
[3].
4
3.
Under Settings, enter the previously
created KNX group addresses for the
Virtual Dimmer
function [4]. If neces-
sary, use the list function on the right
next to the input fi eld.
Volume (4-bit) > dim > rocker 1.
SMART VISU SERVER + SONOS 15
Need help?
Do you have a question about the Smart Visu Server and is the answer not in the manual?