Jung Smart Visu Server Quick Start Manual page 44

4.1 Create areas and functions
After you have established the connection to the KNX bus, you now create areas and functions in the SV Server.
Note: The following is based on a confi gured system with already created functions and rooms.
1
1. On the KNX tab, enter the IP address
of the KNX IP interface in the KNX IP
Gateway [1] fi eld.
2. Then import the required group
addresses [2].
2
3
4
3. You can create rooms (areas)
functions [4] in the Areas & Functions
tab.
[3] and 4. Allocate the appropriate group
addresses [5] to the function.
SMART VISU SERVER + ASTRO FUNCTION 7
5