Jung Smart Visu Server Quick Start Manual page 103

9.3 Action create email messaging
Last of all you create an action which sends you an email message if the temperature limit value you specified above has been fallen below or exceeded.
1
2
1. In SV Control, go to Actions.
2. Create a new temperature limit value
email message [1] action for the func-
tion you have just created.
3. In the edit action [2] field, allocate the
action to an area.
3
4
5
6
4. Now select an action type [3], in this
case event-dependent.
5. Select an action trigger [4], in this
case temperature limit value.
6. Select the condition for triggering
in this case With every On.
7. Under Add function to action [6],
select the email message function
you created previously.
[5],
E-MAIL MESSAGING 16