Send Data; Checking The Internet Connection - Ametek ORTEC radEAGLET User Manual

5.26 Send Data

Highlight the next item. Cycles to the top item after you reached the last item.
Change
Edit the highlighted setting.
Exit
Return to the superior screen.
5.26 Send Data
You can sent saved spectra (see 5.1, p. 47) or reachback data sets (see 5.25, p. 81) via
e-mail with this command.
Sending mail is possible only while your radEAGLET is connected to the Internet, so this is
checked first, Fig. 87, p. 84.
If there is no connection you are routed to the appropriate settings screens to configure a
connection, Fig. 88, p.
84/140
Figure 87:

Checking the Internet connection

85 (see 5.6, p. 54).
Software 3.2.0 • Document 3.2.2o
radEAGLET User Manual
© innoRIID GmbH • 2018-10-24