radEAGLET User Manual
Current Dose Rate
Duration (Real, Live, Dead)
Maximum Peak Height
Analyze
Let the radEAGLET apply its identification algorithm to the current spectrum. The
result is shown on the screen (Fig. 32, p. 45) until you press Analyze again.
Cursor Right
Move a cursor into the spectrum diagram from lower to higher energies along the
horizontal axis.
The cursor is a vertical line (Fig. 33, p. 46) labeled with the energy, the channel number,
and the number of counts at this position in the spectrum.
© innoRIID GmbH • 2018-10-24
Count Axis
Channel or Energy Axis
Figure 31:
The spectrum screen
Figure 32:
Result of a spectrum analysis
Software 3.2.0 • Document 3.2.2o
radEAGLET Advanced Operations
Current Count Rate
Vertical Scaling
Acquisition Status
Identified Peaks
Results (Confidence (1–10)
and Nuclide)
45/140