Tektronix 2706 Instruction Manual page 7

Preface
What you Need to Know
How to Use This Manual
iv
H Chapter 3, "Performance Verification," tells you how to check that the
Preselector is operating within specification, and how to troubleshoot
problems with the Preselector.
H Chapter 4, "Applications," describes ways you can use the Preselector.
H Appendix A, "Specifications," lists the electrical, environmental, and
mechanical specifications of the Preselector.
H Appendix B, "Using the GPIB Interface," describes in detail the commands
you use to operate the Preselector remotely.
H Appendix C, "Options," describes in detail the power cord and extended
service options of the Preselector.
H Appendix D, "Parts List," lists the part numbers of the standard and optional
Preselector accessories.
H Appendix E, "Repackaging for Shipment," describes how to package the
Preselector for shipment.
To use this manual, you need to know two things:
H How to operate a spectrum analyzer.
H The basic concepts of signal analysis.
If you plan to operate the Preselector remotely, you also need to know how to
use your GPIB controller.
This manual is designed to help you learn to use the Preselector quickly and
easily.
Follow these steps to use this manual:
1. Read the rest of this preface.
2. Read Chapter 1, "Introduction," for an overview of the Preselector's features.
3. Follow the instructions in Chapter 2, "Using the Preselector," to learn how to
use the Preselector.
4. Use Chapter 3, "Performance Verification," and Appendix A, "Specifica-
tions," to check that the Preselector is working correctly.
2706 RF Preselector