Appendix E: Repackaging For Shipment - Tektronix 2706 Instruction Manual

Appendix E: Repackaging for Shipment

2706 RF Preselector
Pack the Preselector for shipping to a Tektronix Service Center for service or
repair as follows:
1. Attach a tag to the instrument that shows:
H the owner's name and address
H the name of an individual at your location who can be contacted
H the complete instrument serial number (stamped on a label attached to
the instrument rear panel)
H a description of the service required
2. Use a container of corrugated cardboard with a test strength of 140 kg
(375 lbs) and inside dimensions that are at least 15 cm. (6 in.) more than the
Preselector cabinet dimensions, to allow for cushioning.
3. Wrap the Preselector with plastic sheeting to protect the finish.
4. Cushion the Preselector on all sides with packing material or plastic foam.
5. Seal the container with shipping tape or an industrial, heavy-duty stapler.
6. Send the container to your nearest Tektronix Service Center.
E–1