SaMASZ KDTC 260 Operator's Manual page 32

Fig. 31. Adjustment of swath guides: 1 - swath guide, 2 - locknuts, 3 - arm adjustment screws, 4 - locknuts,
In order to set swath width, adjustment of swath guides (1) should be performed (Fig. 32)
(for: KDTC 260 S, KDTC 261 S/SL, KDTC 300 S, KDTC 301 S/SL):
loosen eye screw (2) of the swath guide,

set the swath guide (1) as needed,

tighten screw (2),

even spreading of swath might be adjusted with wheels (3) the same as it is preformed with

guides.
Fig. 32. Adjustment of swath guides: 1- swath guide, 2 - adjustment screw, 3 - swath wheel
In order to set swath width, adjustment of swath guides (1) should be performed (Fig. 33)
(for: KDTC 260 W, KDTC 261 W, KDTC 300 W, KDTC 301 W):
loosen eye screw (2) of the swath guide,

set the swath guide (1) as needed,

tighten screw (2).

Operator's manual
5 - shield adjustment screws, 6 - guide arm, 7 – shield
- 30 -
Rear disc mowers with central suspension
1
2
3
1
1
6 4 5
7
2 3