SaMASZ KDTC 260 Operator's Manual page 11

NOTICE:
Optional extra equipment should be ordered separately.
The mower is equipped with such elements as holders and brackets used to mount warning
lights and plates. Combined lights and reflectors are mounted on the warning plates.
Tab. 6. Recommended PTO shafts for KDTC mowers
Mower Power Length Moment
KM
KDTC 260
KDTC 261
KDTC 300
KDTC 301
KDTC 340
47 1010-1417
KDTC 341
KDTC 261
S/SL/W
KDTC 301
S/SL/W
KDTC 261
KDTC 301
KDTC 340
47 840-1162
KDTC 341
KDTC 260 S/W
KDTC 300 S/W
KDTC 261
KDTC 301
KDTC 341
KDTC 260 S/W
KDTC 300 S/W 54 880-1222
KDTC 261
S/SL/W
KDTC 301
S/SL/W
PTO shafts of other brands with equivalent parameters could be used after SaMASZ permission.
NOTICE:
Lubricate the PTO shaft with high quality multi-purpose grease every 50 shaft
operating hours. If access holes are available, lubricate fittings through access holes.
E-kits need lubrication every 50 hours. See decal on guard if applicable.
PTO shaft's end
without clutch – To
be mounted on the
tractor's side.
Operator's manual
mm Nm
620 7G5N101CE0071A1A
620 7G5T084FX007007RTA
520 7G5T088FX007007PTA
Fig. 5. PTO shaft lubrication points. Mounting directions
Rear disc mowers with central suspension
Symbol Clutch
Overrunning
Wright
- 9 -
Manufactur
Notes
er
Bondioli &
Built-in
Pavesi
(540 rpm)
Built-in
(1000 rpm)
PTO shaft's end with
overrunning clutch –
To be mounted on
mower's side.