Safety Requirements For Use; Compliance; Product Descriptions - BYD Energy Pod Series User's Installation And Use Manual

commissioning of the product
 The installation and commissioning personnel of the product shall have the
ability to evaluate the potential risks
 Before commencement of installation, the installation personnel shall identify all
safety risks at the site and implement the necessary safety risk controls
 Please read and understand the safety information in this Manual carefully
before commencing the installation.

4 Safety Requirements for Use

 Do not touch the battery module with the wet hands, in order to avoid the
electric shock
 Do not squeeze, impact or puncture the battery, in order to avoid the
unnecessary damage and loss
 Store and use the battery according to the instructions in this Manual, and
comply with the relevant local laws and regulations and relevant safety
standards
 Before installation, replacement, repair and maintenance, remove all metal
objects (e.g., keys) that may cause a short circuit
 Ensure that the fuse on the base is not installed prior to all installation,
replacement and maintenance processes
 This product shall be repaired, replaced and maintained by the authorized
personnel with electrician qualification
 It„s forbidden to reverse the polarity of the battery
 The electrolyte of the battery will harm the skin and eyes; do not damage or
disassemble the battery
 Disconnect the battery with the grid/load before installation and maintenance,
and then disconnect the battery supply
In the process of transporting, handling and storing the product, do not stack the

unpacked products, in order to avoid the irreversible damage.
 The packaged battery modules shall not be stacked in excess of the specified
quantity.
III. Compliance

The BYD Energy Pod product range has been designed and manufactured to comply with
the requirements of the relevant Australian and New Zealand Standards

The product design has been independently certified and carries the RCM
marking and is listed on the Australian Government ERAC website

The BYD Energy Pod is also designed in compliance with the Australian Best
Practice Guide: Battery Storage Equipment – Electrical Safety Requirements.
IV. Product Descriptions
Secret
4