Location - BYD Energy Pod Series User's Installation And Use Manual

equipment
 Standard maintenance and use of protective devices for electrical equipment
 Provision of emergency rescue for the injured
 Compliance with local laws, regulations, standards and instructions.
1.2 Notes
The attention shall be paid to the followings:
Check whether the product is damaged prior to installation. The product has

been carefully checked and packed prior to shipment, but may still be damaged
possibly during transportation
 Wear the personal protective equipment during installation of product, in order to
avoid the electric shock
 In the process of handling the product, the product shall be protected from the
heavy objects, in order to avoid the damage due to impact by the heavy object.
 Please ensure that all switches of the system are turned off prior to installation, in
order to avoid the electric shock
 Please follow the installation procedures strictly during installation of the product,
in order to avoid the safety accidents caused by incorrect installation
 The installation of the product shall be completed as soon as possible, so as to
avoid the irreversible damage caused due to long-term storage of product.

2 Location

An appropriate location should be considered before installing BYD Energy Pod.
2.1 Location restrictions in Australia
Local or National restrictions may prohibit installation in some locations. In Australia,
AS5139 provides guidance as to where a Battery Energy Storage System (BESS)
cannot be installed.
Some of the restricted locations under AS5139 include;
 Under Stairs
 Within 600mm of any exit
 Within 600mm of the vertical side of any window or ventilation
 Within 600mm of other equipment not associated with the BESS (e.g a hot water
system or air conditioner) and within 900mm of such equipment above the top of
the BESS
 In any Habitable room (including bedrooms, kitchens, studies, lounge/living
rooms, theatre rooms etc.).
It is the responsibility of the Installer to ensure that the installation location complies
with any and all restrictions mandated by local or national regulations.
For the sake of convenience, Figure 4.1 from AS/NZS 5139:2019 is reproduced
below.
Secret
13