Quality Assurance - BYD Energy Pod Series User's Installation And Use Manual

Ambient temperature
for storage
>45℃
4.2 Requirement for recharging after over discharge
Please charge the overdischarged battery according to the time specified in the table
below; otherwise the overdischarged battery module will be damaged.
Recharging Conditions of Battery after Overdischarge:
Storage Environment Temperature
-10~25℃
25~45℃
4.3 Battery placement conditions
After completion of system installation, it shall be confirmed that the system can be
charged and discharged normally. Otherwise, please ensure that the system switch is
OFF. During use, if the user needs to leave for a long period of time (≥30 days), the
following two methods may be adopted to ensure that the battery is not damaged:
1. Ensure that the SOC system of the battery is above 60% and the BA Switch is
kept OFF. The system shall be restarted to charge the battery within 90 days.
2. Prior to leaving, check whether the whole system works normally, especially
whether it can be charged. Please ensure that the whole system works properly
in case of nobody at home.
In case of damage to the product due to non-quality reasons, the product will lose the
warranty service!
VII.

Quality Assurance

After the product is installed and put into use, BYD will start to provide the quality
assurance service according to the BYD Energy Pod User's Installation and Use
Manual and the Energy Pod Warranty Letter of BYD Auto Industry Company Limited.
1． Please contact the local service provider for technical support and after-sales
service.
2． Please refer to the quality assurance agreement for details and obtain the Energy
Pod Warranty Letter of BYD Auto Industry Company Limited by the following way:
http://asms.byd.com/asapp/
Relative humidity for
storage environment
/
Storage Time
≤15 days
≤7 days
Storage Time SOC
Prohibited /
Secret
35