designed to be fixed on the wall, and comprised of the wall hanging accessory
1 installed at the rear of BMS and the wall hanging accessory 2 installed on the
wall.
3.3.3 Battery
■
Label:
■
Unpacking:
■
Accessories:
Accessories
M616 assembling bolt
3.4 Installation environment
For details of requirements for installation environment, see the Article 2 in Part II
Safety in this Manual.
4
Formal Installation
4.1 Hole drilling
As for determination of installation position of the product, the installation position
must be horizontal; the holes shall be drilled on the wall and ground as shown in the
figure below, wherein, the specified size a shall be selected according to the local
requirements. The drill bit 16mm shall be used with a drilling depth of 80mm
P.R.
BATTERY
G.W.
___kg
O.D
800345250mm
Graphical expression
Qty.
Function
2
Fixation of Battery
Secret
18