Advertisement
Quick Links
Maya Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
C
D
A
B
bol t
locking
dowel
lon g
screw x8
x28
nut x28
x28
J
K
L
DL
CR
DR
bracket
runner
runners
runners
tracks x3
x3
x3
Hardware Supplied
WARNING:
Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
mocka.co.nz | mocka.com.au
| PO BOX 6171, Maroochydore, QLD, 4558
E
F
G
H
screw
small
wedge
screw
x8
x8
x20
screw x30
M
N
O
P
cover
felt pad
adjuster
screw
x4
x8
x4
x1
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
V
I
safety
strap x1
CL runner
tracks x3
Q
R
screw
x12
x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
W
X
Y
screw
wall
wall
washer
x1
anchor
screw
x1
x1
Wall Strap
Z
x2
1
Advertisement
Related Manuals for Mocka Maya Entertainment Unit
Summary of Contents for Mocka Maya Entertainment Unit
- Page 1 Maya Entertainment Unit Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. safety screw wall wall washer strap x1 anchor screw screw small wedge screw CL runner bol t locking dowel lon g screw x8...
- Page 2 Maya Entertainment Unit Assembly Instructions Insert 8x bolts (A) and 8x dowels (C) into panel [1]. Insert 4x bolts Attach 1x CL runner track (I) to panel [2] and secure with 3x small (A) into panel [6]. Tighten with a screwdriver.
- Page 3 Maya Entertainment Unit Assembly Instructions Attach panels [2] and [3] to panel [6] and secure with 4x locking nuts Attach 1x CL runner tracks (I) to each panel [7] and secure with (B) and tighten with a screwdriver. 3x small screws (F). Flip panels [7] over, attach 1x CR runner tracks (J) to each panel [7], and secure with 3x small screws (F).
- Page 4 Maya Entertainment Unit Assembly Instructions Slide panel [8] between the grooves of panels [2] ,[3] and [6] to form Attach 2x panels [5] to panel [6] with 4x dowels (C) and secure with the back of the unit, as shown. Attach panel [1] to the rest of 4x long screws (R) and tighten with a screwdriver.
- Page 5 Maya Entertainment Unit Assembly Instructions Attach 2x panels [7] to panel [6] with 4x dowels (C) and secure with Slide panel [9] between the grooves of panels [2] ,[3] and [6] to form 4x locking nuts (B) and tighten with a screwdriver.
- Page 6 Maya Entertainment Unit Jolt Wardrobe Assembly Instructions Attach panel [4] to the rest of the unit with 8x dowels (C) and Attach 4x brackets (M) to the panel [4] and secure with 20x secure with 8x long screws (D) and tighten with a screwdriver.
- Page 7 Maya Entertainment Unit Jolt Wardrobe Assembly Instructions Drawers x3 Turn 4 x legs [10] into brackets (M) until firm. Apply 4 x felt pads (O) Insert 4x bolt (A) into panel [11]. Tighten with a screwdriver. to legs [10] as shown. Turn 1x support leg [16] into panel [4] until firm.
- Page 8 Maya Entertainment Unit Jolt Wardrobe Assembly Instructions Drawers x3 Drawers x3 Attach panels [12] and [13] to panel [11] with 4x locking nuts (B). Slide panel [14] along the grooves between the side panels [12] and Tighten with a screwdriver.
- Page 9 Maya Entertainment Unit Jolt Wardrobe Assembly Instructions Drawers x3 Drawers x3 Attach panels [15], [12] and [13] with 4x screws (Q). Tighten with a Attach DL runner (K) to panel [12] and DR runner (L) to panel [13] with screwdriver.
- Page 10 Maya Entertainment Unit Jolt Wardrobe Assembly Instructions strap Insert the completed drawer into the main unit as shown, ensuring Attach 8x wedges (G) to the corners of the panels [8] and [9] as they slide easily along the rails. shown, and secure with 8x small screws (H).
- Page 11 Maya Entertainment Unit Jolt Wardrobe Assembly Instructions strap wall plug screw Once assembled lift furniture into place, do not drag. Attach the other end You're done, enjoy! of the safety strap (V) to the wall using 1x screw (Y), 1x wall plug (X) and 1x washer (Z).
Need help?
Do you have a question about the Maya Entertainment Unit and is the answer not in the manual?
Questions and answers