Advertisement
Table of Contents
Marlow Desk
Thank you for your purchase.
Please follow the instructions below for correct assembly.
C
A
B
bolt
dowel
locking
x16
x24
nut x16
K
I
J
L + R slide
r/washer
rail x4
screw x2
Phillips & Flathead screwdrivers required
mocka.co.nz | mocka.com.au
D
E
F
small
screw
large
screw x20
x22
screw x8
L
M
N
wall
washer
safety
plug x2
x2
strap x2
Hardware Supplied
WARNING:
G
H
tip over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with
all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please
note that different wall materials may require different fixing devices from
those supplied.
long
nut
screw x4
x4
O
P
wedge
small
screw x4
x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Any furniture that is not anchored to a wall has the potential to
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Marlow Desk
Summary of Contents for Mocka Marlow Desk
- Page 1 Marlow Desk Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
- Page 2 Marlow Desk Assembly Instructions Drawers x2 Attach slide rails (I) and (J) to panels [10] and [11] with 4x small screws Attach 2x slide rails (I) to panels [3] and [5] and secure with 6x small (D). Attach panels [10], [11] and [12] with 4x screws (E). Slide panel [13] screws (D).
- Page 3 Marlow Desk Assembly Instructions Attach panels [3], [4], [5] and [6] to panel [1] with 8x dowels (C) and 12x Slide panel [7] along the grooves between the rear of the panels to create bolts. Secure with 12x locking nuts (B) and tighten with a screwdriver.
- Page 4 Marlow Desk Assembly Instructions Attach leg panels [8] and [9] together with 4x long screws (G) and 4x Attach the assembled leg panels to the underside of the desk [2] with 8x nuts (H). Tighten with a screwdriver. large screws (F). Tighten with a screwdriver.
- Page 5 Marlow Desk Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Insert the completed drawers into the main unit as shown, ensuring Attach 4x wedges (O) to the corners of the back panel [5] as shown, and they slide easily along the rails.
- Page 6 Marlow Desk Assembly Instructions Wall Mount Once assembled lift furniture into place against a wall, do not drag. Secure You’re done, enjoy! the bottom of the 2x straps (M) to the cabinet with 2x r/washer screws (K). Attach the top end of the straps (M) to the wall using 2x wall plugs (L), 2x washers (N) and 2x screws (E).
Need help?
Do you have a question about the Marlow Desk and is the answer not in the manual?
Questions and answers